LED Pole Screen is an ideal replacement for the traditional light pole banner.
With a cluster controller, the LED displays can be changed the videos or photos by mobile phone or computer in real-time.
TL312-46 inch single-sided outdoor LED pole screen is specially designed for smart city lamppost installation, suitable for 5-8 meters of lamppost.
User-friendly, plug and play, easy to operate thanks to the highly intelligent controlling system.
Application Scenarios
Besides, there are 4 fans in LED Pole Screen, providing a strong airflow. Some times, not all the 4fans have to be working at same time. When some are working, others can be at rest. And then next time, it’s vice versa. So eventually, the working time for each fan is not that long. It’s possible to give a longer life time for these fans.
Smart City
LED Pole banner in Tecnon Smart Display is a part of smart city management system. The LED pole banner is centralized management of brand information by the enterprise, and then the designed advertisement display information is transmitted to people’s eyes in an interactive manner such as images, texts, videos, etc., and the traditional advertising equipment is too passive to promote the publicity.
While the Smart & Digital Pole LED display attracts people’s attention, it also mobilizes the enthusiasm of people to participate actively, which in turn increases the number of advertisements that are placed on the LED display of the streetlight pole.
Fans on the Top
Tecnon Smart Display used temperature controlled fan. 5V, totally 4fans in LED Pole Screen. Each fan has a temperature sensor. Only when the sensor detects the temperature inside the cabinet is higher than 30°C, will the fan start to work. The higher the temperature, the faster it will run.
But when the temperature is lower than 30°C, it will stop running and remain at rest. That means in the morning time, or in the winter time, when it’s cold outside, these fan do not need to be always running. Therefore, these fans have a much longer life time compared with the conventional mechanical fans which will be running 24hours a day.
Besides, there are 4 fans in LED Pole Screen, providing a strong airflow. Some times, not all the 4fans have to be working at same time. When some are working, others can be at rest. And then next time, it’s vice versa. So eventually, the working time for each fan is not that long. It’s possible to give a longer life time for these fans.
Heat dissipation
This pole screen is to be hanged in the air. It will be under the sunshine the whole day. The temperature inside will be very high in summer time. Our products can withstand temperature up to 80°C. Besides, our cabinet is a relatively sealed case, for waterproof sake. The heat will be blocked inside and cause the system to start self protection mode by stop working.
To have a system that can withstand high temperature is very important for a pole screen.
In early days, we had some screens that only worked properly at night time and in the morning. They stopped working since noon time. That’s because the temperature inside was too high. Sometimes, power cables melted inside the cabinet.
After several years efforts, we are proud to announce that our design can withstand 80°C.
We only use components that can withstand high temperature.
We only use industrial grade of capacitors and chips on sending card.